Pan Delta Controls

  • Increase font size
  • Default font size
  • Decrease font size
Pan Delta Controls

Feb 2014 - Acquisition of New Pick & Place Machine - Manncorp MC-385V2V

Pan Delta Controls Pte Ltd is pleased to announce the recent acquisition of a brand new Manncorp MC-385V2V Pick and Place Machine. The MC-385V2V was selected as it is ideal for the high-mix jobs that we are engaged in. With our new high-speed equipment, we are capable of placing up to 8,000 parts per hour with greater accuracy.

The Manncorp MC-385V2V replaces our older QM-2100 Machine by SMTmax (purchased in 2012). This latest equipment purchase demonstrates Pan Delta Control's commitment to development and continuous improvement of effective and efficient systems and processes across the organisation.

The video shows the production of our NAV1560DC-V3.06 Current Sensor Module which is used in our DC Navigation Light Control Panels. 


 

NEW! STC-208 - Shaft Tachometer System

We are please to introduce the STC-208C Shaft Tachometer Signal Conditioner Unit. The STC-208C features the same high accuracy output as the STC-206C with the following added features:

• 2 x Fully isolated 4-20mA analog output. Can be used to interface to the DP System, Joystick System or Vessel Monitoring System.
• Sensor Fault Detection:
  · Able to detect when one or both Proximity Sensors are disconnected.
  · Able to detect when any of the power lines (+ve or -ve) to the Proximity Sensor(s) are broken.
  · Alarms when target is sensed on one Proximity Sensor, but not on the other.

To learn more about the STC-208 System, please contact us at This e-mail address is being protected from spambots. You need JavaScript enabled to view it .

 

Dec 2012 - Acquisition of LPKF ProtoMat S63

We are proud to announce the recent acquisition of a new LPKF ProtoMat S63 Circuit Board Plotter. Click here for more information.


 

April 2013 - Acquisition of GJMSJG-12595 Metal Laser Cutting Machine

 

As a commitment to provide our customers with a faster turnaround time while reducing costs, we are proud to announce the recent acquisition of a new GJMSJG-12595 Metal Laser Cutting Machine. 

 

Sep 2012 - bizSAFE Level 3 Certification

We have been certified by the Workplace Safety and Health Council (WSHC) as a bizSAFE Level 3 Company!

BizSAFE is a 5 step program to assist Small and Medium Enterprises (SMEs) to build up their Workplace Safety and Health (WSH) capabilities in order to achieve significant improvements in safety and health standards at the workplace.

Under this program, SMEs are guided through several stages, starting with top management demonstrating their commitment towards Workplace Safety and Health (bizSafe Level 1). Next, for bizSafe Level 2, the company will nominate a Risk Management (RM) Champion who will attend a 2-day bizSAFE Level 2 RM Course. At the end of the course, the RM Champion must chart out the RM Implementation Plan for the company. To acquire bizSafe Level 3, the company has to fully implement the RM Plan as developed in Level 2, and the plan be successfully audited by an independent MOM-approved WSH Auditor, in compliance to WSH (Risk Management) Regulations 2006.

 
  • «
  •  Start 
  •  Prev 
  •  1 
  •  2 
  •  Next 
  •  End 
  • »


Page 1 of 2