DMX Modules & Controllers
  • Register

DMX Relay & Splitter Modules & Controllers

DMX-S8 - 8-WAY 485 AND POWER SPLITTER MODULE

Overview

The DMX-S8 is an 8-way RS-485 and power splitter designed for fixed installations.

It can be used as a hub for DMX512-A signals to simplify wiring or to extend the reach of a DMX universe.

It features an isolated receiver with a passive THRU port.

 

Features

  • DMX512-A Compatible
  • Isolated Receiver
  • Jumper Selectable Termination
  • DMX THRU Terminal (Passive Loop)
  • DIN-Rail Mounting Kit (Optional)

 

Application

  • Extending the reach of a DMX Universe

 

Specifications

Parameter Description
Supply Voltage

12 to 24 VDC (+/- 10%)

Power Consumption 1 Watt (max)
Max. Current (per Load) 3A
Max Current (Total) 16A
Max. RS-485 Signaling Rate 250 kHz
Isolated Receiver Yes
DMX THRU Yes (Passive Loop)
Operating Temperature 0 to 50 degC
LED Indication None
Dimensions 5.5" x 2.875"
Weight 250g
Warranty 1 Year (Limited Warranty)

 

Ordering Information (Part Numbers)

  • DMX-S8 REV A1 - 8-Way RS-485 & Power Splitter Module

 

Overview

The DMX-RL8 DMX Relay Module provides On/Off control for up to 8 devices using the well-known DMX-512A protocol. It features an isolated receiver with a passive DMX THRU port. The DMX start slot is selectable from the full range of 1 to 512 (via onboard dip-switches) The DMX-RL8 uses 8 DMX slots and is able process the incoming DMX data stream at its full speed (maximum update rate of 44 updates per second).

 

 

Features

  • 8 x DMX Controlled Relay Outputs
  • Isolated Receiver
  • Full DMX data rate (44 updates per second)
  • DMX Start Slot selectable between 1 and 512 (0 to 511 on DIP-Switch)
  • DIP-Switch selectable termination
  • LED Indicators for Supply, DMX Receive and Individual Relays
  • DMX THRU Terminals (Passive Loop)
  • Able to switch loads up to 10 Amps

 

Application

  • Control of non-DMX devices such as:
    • Fountain Solenoid Jets
    • Fog Machines
    • Confetti Cannons
    • Fans

 

Specifications

Parameter Description
Number of Relay Outputs 8
Supply Voltage

12VDC (+/- 10%)

Response Time ~25ms (typical)
Power Consumption 0.4A @ 12 VDC (Full Load)
Data-In Protocol DMX512-A
Maximum Update Rate 44 Updates / second
Termination Resistor 120-ohm (Jumper Selectable)
DMX Start Address Slot 1 to 512 (0 - 511 on DIP Switch)
Isolated Receiver Yes
DMX THRU Yes (Passive Loop)
Operating Temperature 0 to 50 degC
Over Current Protection PTC Fuse (0.5A)
Relay Contact Rating

7A @ 250VAC
10A @ 24VDC

Relay Output Latency

1 DMX Packet

Relay Activation Condition

Relay ON when DMX Slot >= 127,
Relay OFF when DMX  Slot < 127

DMX Unit Load 1 Unit
DMX Data Loss Handling Maintain Last State
DMX START Code Handling Responds to NULL START code, all other codes ignored.
LED Indication Power, DMX Data Received, Relay Status (Individual)
Dimensions 5.6" x 3.3"
Weight 250g
Warranty 1 Year (Limited Warranty)

 

Ordering Information (Part Numbers)

  • DMX-RL8 REV B1 - 8-Channel DMX Controlled Relay Module (Firmware version: 2.00)
  • DMX-RL8(12V) REV A0 - 8 Channel DMX Controlled Relay Module (12 VDC) [Obsolete]
  • DMX-RL8(24V) REV A0 - 8 Channel DMX Controlled Relay Module (24 VDC) [Obsolete]

 

Overview

The DMX-AN8 is a DMX512-A compatible 8-channel 0-5V DAC output board designed for fixed installations. It features an isolated receiver with a passive DMX THRU port.

The DMX start slot is selectable from the full range of 1 to 512.

 

Features

  • DMX512-A Compatible
  • 8-Channel DAC Output (0 to 5 Volts)
  • Isolated Receiver
  • Selectable DMX Start Slot from 1 to 512 (0 - 511 on DIP-Switch)
  • DIP-Switch selectable termination
  • LED Indicators for Supply and DMX Receive
  • DMX THRU Terminal
  • DIN-Rail Mounting Kit (Optional)

 

Application

  • Control of non-DMX devices such as:
    • Variable Speed Drives

 

Specifications

Parameter Description
Number of Analog Outputs 8
Analog Output Info

Range: 0 to 5 Volts
DAC Accuracy: +/- 2 LSB
DAC Drift: < 0.2% 

Supply Voltage

12VDC (+/- 10%)

Power Consumption 0.15A @ 12 VDC
Data-In Protocol DMX512-A
Maximum Update Rate 22 Updates / second (Every alternate packet)
Termination Resistor 120-ohm (Jumper Selectable)
DMX Start Address Slot 1 to 512 (0 - 511 on DIP Switch)
Isolated Receiver Yes
DMX THRU Yes (Passive Loop)
Operating Temperature 0 to 50 degC
Over Current Protection PTC Fuse (0.2A)
Relay Contact Rating

7A @ 250VAC
10A @ 24VDC

Relay Output Latency

1 DMX Packet

Relay Activation Condition

Relay ON when DMX Slot >= 127,
Relay OFF when DMX  Slot < 127

DMX Unit Load 1 Unit
DMX Data Loss Handling Maintain Last State
DMX START Code Handling Responds to NULL START code, all other codes ignored.
LED Indication Power, DMX Data Received
Dimensions 3.7" x 2.875"
Weight 200g
Warranty 1 Year (Limited Warranty)

 

Ordering Information (Part Numbers)

  • DMX-AN8 REV B1 - 8-Channel DMX to Analog Converter Module (Firmware version: 2.00)

 

Request for Quote

Our Address:
10 Admiralty Street, 
#04-76, North Link Building, 
Singapore 757695
Hours of Operation:
Mon. to Fri.: 8.30am to 6.00pm
Weekends & Public Holidays: Closed

Contact Us

seslichat sesli chat